Heyy my lovely Crochet Lovers,Today I share a free amigurumi crochet pattern for you.
As you know,I share new amigurumi free patterns every week. master crochets, amigurumi gazelles, amigurumi bears, amigurumi doraemon, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi dolls, amigurumi bees, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…Hope you like the pattern.Do remember I only “translate” Crochet patterns,none of these patterns are mine.This pattern is brought to you by ToseBe,so thanks to her for sharing this beautiful Amigurami Crochet Toy Train pattern.
Materials and tools used:
YarnArt jeans (55% cotton, 45% polyacrylic):. (A) turquoise
(B) purple
(C) gray
(D) black (E) white
(F) “golden”
Hook No. 2.25
Knitting markers
Needle with a wide eye for stitching,Filler Plastic canvas Gray button (2 cm)
Conventions (A) – the letter indicates the color of the working thread
sc – single crochet
psb – half-column
psbsn – half-column with a crochet
inc – increase (knit 2 columns in one loop)
dec – decrease (knit 2 columns together)
ch – air loop
sl-st – connecting column
(…) *n – repeat the sequence in brackets n times (6) – total
number of columns in a row
magic ring – amigurumi ring
ZSP – back wall of the loop
PSP – front wall of the loop
PM A – place marker A
The description does not contain basic crochet lessons! Level
difficulty – medium
Description
Boiler
Thread (A) knit in a spiral
1 r: 6 sc in magic ring
2 r: 6 inc (12)
3 r: (1 sc, inc) * 6 (18)
4 r: (2 sc, inc) * 6 (24)
5 r: (3 sc, inc) * 6 (30)
6 r: (4 sc, inc) * 6 (36)
7 r: for ZSP, 36 sc
8-15 p: 36 sc
16 p: for ZSP, (7 sc, dec) * repeat until the end of the row (32)
17-23 p: 32 sc.
Finish ss, leave a long end for sewing. Detail tight
fill.
Cauldron decorations
1st decoration
Connect the thread (F) to the 6th row of the boiler.
1 r: 36 psbs for PSP
2-3 r: 36 sc.
Finish ss, leave a long end for sewing. 1st row decoration
sew to the 3rd row.
2nd decoration
Connect the thread (F) to the 14th row of the boiler.
1 r: 36 psbs for PSP
2-3 r: 36 sc.
Finish sl-st, leave a long end for sewing. 1st row decoration
sew to the 3rd row.
3rd decoration
Attach a thread (F) to the 22nd row of the boiler.
1 r: 32 psbs for PSP
2-3 r: 32 sc.
Finish ss, leave a long end for sewing. 1st row decoration
sew to the 3rd row.
Cabin (walls, bottom, roof)
The cabin consists of a floor, external and internal sides. The floor is knitted first
and walls grow out of it.
Floor
With a thread (B), dial a chain of 6 ch.
R 1: (for ZSP) sc in the 2nd loop from the hook, 4 sc, 4 sc in the next loop.
Now knit on the other side of the chain. 3 sc in, 3 sc in the next loop
(fourteen)
2 r: (inc of 3 sc, 3 sc, inc of 3 sc, 2 sc) * 2 (22)
3 r: 1 sc, inc out of 3 sc, 5 sc, inc out of 3 sc, 4 sc, inc out of 3 sc, 5 sc, inc out
3 sc, 3 sc (30)
4 r: 2 sc, inc out of 3 sc, 7 sc, inc out of 3 sc, 6 sc, inc out of 3 sc, 7 sc, inc
of 3 sc, 4 sc (38)
5 r: 3 sc, inc out of 3 sc, 9 sc, inc out of 3 sc, 8 sc, inc out of 3 sc, 9 sc, inc
of 3 sc, 5 sc (46)
6 r: 4 sc, inc out of 3 sc, 11 sc, inc out of 3 sc, 10 sc, inc out of 3 sc, 11 sc,
pr from 3 sc, 6 sc (54)
7 p: work by placing markers. 5 sc, inc out of 3 sc (PM A in the 1st column
increase), 13 sc, inc from 3 sc (PM B in the 1st column of increase), 12 sc, inc from
3 sc, 13 sc, inc out of 3 sc (PM C in the 1st column of increase), 7 sc (62).
finish work sl-st
Front inner wall
Hold the piece wrong side up so that marker A is in
upper right corner.
1 r: work for ZSP. Attach the thread (B) (sl-st, ch 1, 1sc) in place
marker A, 13 sc (14), turn the work.
2-11 p: 1 ch, sc to the end of the row (14)
12 p: 1 ch, 2 sc, PM D, sc to the end of the row (14). Do not break the thread.
First side of the window
1-4 p: ch 1, 2 sc, turn, leaving the rest of the loop unworked (2)
5 r: 1 ch, inc, 1 sc (3)
6 r: 1 ch, 1 sc, PM E, 2 sc (3).
Cut the thread.
The other side of the window
1 p: on the right side of the part, attach the thread B (sl-st, ch 1, 1 sc) in place
marker D, 1 sc (2)
2 – 4 p: 1 ch, 2 sc, turn (2)
5 r: 1 ch, 1 sc, inc, turn (3)
6 r: 1 ch, 3 sc (3).
Cut the thread.
Upper part of the wall (above the window)
1 r: attach the thread B (sl-st, 1 ch, 1 sc) on the front side on the right (in place
marker E), 2 sc, ch 10, 3 sc (10)
2 r: 1 ch, inc, 2 sc, 10 sc, 2 sc, inc (18)
R 3: Ch 1, sc to end of row.
Thread cut
Front outer wall
R1: Attach yarn B (sl-st, 1 ch, 1 sc) in place of marker A, 14 sc (15).
Next, knit as the inner front wall.
Left inner cabin wall
1 row: knit for ZSP. From the wrong side of the floor part, attach thread B
(sl-st, 1 ch, 1 sc) in place of marker B, 15 sc (16)
2-11 r: 1 ch, 15 sc (16)
12 p: 1 ch, 3 sc, PM F, sc to the end of the row.
Do not break the thread.
First side of the window
1-4 p: 1 ch, 3 sc, turn (2)
5 r: 1 ch, inc, 2 sc (4)
6 r: 1 ch, 1 sc, PM G, 2 sc (4).
Cut the thread.
The other side of the window
1 p: attach the thread (B) (sl-st, 1 ch, 1 sc) in place of the marker F, 2 sc,
turn (3)
2 – 6 p: 1 ch, 3 sc, turn (3)
Cut the thread.
Upper part of the wall (above the window)
1 p: attach the thread (B) (sl-st, 1 ch, 1 sc) in place of the marker G, 3 sc, 9 ch,
3sc (16)
2 r: ch 1, 3 sc, 9 sc, 3 sc, inc (17)
R 3: Ch 1, sc to end of row.
Cut the thread.
Left outer cabin wall
1 p: attach the thread (B) (sl-st, 1 ch, 1 sc) in place of the marker B, 15 sc (16)
Next, knit as the left inner wall.
Right inner cabin wall
1 row: knit for ZSP. From the wrong side of the floor part, attach thread B
(sl-st, 1 ch, 1 sc) in place of marker C, 15 sc (16)
2-11 r: 1 ch, 15 sc (16)
12 p: 1 ch, 3 sc, PM H, sc to the end of the row.
Do not break the thread.
First side of the window
1 p: 1 ch, 3 sc, turn (3)
2-5 r: 1 ch, 3 sc, turn (3)
6 p: 1 ch, sc to the end of the row.
Cut the thread.
The other side of the window
1 p: attach the thread (B) (sl-st, ch 1, 1 sc) in place of the marker H, 2 sc,
turn (3)
2 – 4 p: 1 ch, 3 sc, turn.
5 r: 1 ch, 2 sc, inc, turn (4)
R6: Ch1, sc to end of row, PM J (4)
Cut the thread.
Upper part of the wall (above the window)
Row 1: Attach yarn (B) (sl-st, ch 1, ch 1) in place of marker J, 2 sc, ch 9, 4
sc (16)
2 r: 1 ch, inc, 3 sc, 9 sc, sc to the end of the row (17)
R 3: Ch 1, sc to end of row.
Cut the thread.
Right outer cabin wall
1 p: attach the thread (B) (sl-st, 1 ch, 1 sc) in place of the marker C, 15 sc (16)
Next, knit as the right inner wall.
Cabin assembly
From the plastic canvas, cut out two parts of the side walls and one part
the front wall of the cabin, suitable in size. Cut out the windows too.
Place the canvas between the inner and outer walls. Thread B from the beginning
stitch windows. Sew together the inner walls, then the outer
walls.
Engine base
With thread (C) cast on a chain of 85 loops.
Row 1: Sc in 2nd st from hook, sc to end of row (84)
Row 2-3: Ch 1, sc to end of row (84). Cut the thread.
4 p: For PSP. Attach thread C (sl-st, 1 ch, 1 sc), 13 sc, turn (14)
5 – 38 p: ch 1, sc to the end of the row
39 p: 1 ch, sc for ZSP to the end of the row
40 – 41 p: 1 ch, sc to the end of the row
42 r: 1 ch, sc for PSP to the end of the row
43-77: ch 1, sc to end of row.
Leave a long end for sewing. Assemble from part
rectangle. Cut out two suitable sizes from a plastic canvas
rectangle, place them in a knitted base. Stuff the part tightly
sew.
Roof
(D), ch 21
R 1: Sc in 2nd st from hook, sc to end of row (20)
2 – 20 p: 1 ch, sc to the end of the row
21 p: for ZSP. 5 sc, 2 psbs, inc from psbs, PM, (pr from dc) * 4, inc from psbs, 2
psbsn, sc (26)
22 p: for PSP. ch 1, sc to end of row
23-40 p: ch 1, sc to the end of the row
41 p: for PSP. 5 sc, 2 psbs, dec from psbs, (dec from dc)*4, dec from psbs, 2
psbsn, 5 sc (20).
Sew together the 1st and 41st rows. Cut from plastic canvas
a rectangle that fits the size, insert it into the roof part. Top
fill roofs. sl-st connect the sides.
Exhaust pipe
thread D.
1 p: 8 sc in magic ring
2 r: 8 inc (16)
3 r: (1 sc, inc) * 8 (24). Cut the thread.
4 p: thread A. For PSP. 24 sc.
5-6 r: 24 sc
7 p: for ZSP. (2 sc, inc) * 8 (32)
8 p: for ZSP. 32 sc
9-11 p: 32 sc
12 p: for ZSP. (2 sc, dec) * 8 (24)
13 r: (2 sc, dec) * 8 (18)
14 r: (4 sc, dec) * 3 (15)
15 r: (3 sc, dec) * 3 (12)
16-18 p: 12 sc.
Finish the work with ss, leave a long end for sewing. push through
black circle down, forming a pipe. Secure with a seam. Fill. Thread
(F) tie rows 7, 12 and 18 with sl-st.
Farah
Thread (E)
1 p: 8 sc in magic ring
2-3 r: 8 sc. Change thread to F
4 r: 8 sc
5 r: 8 sc for PSP
6 p: for PSP. (3 sc, inc) * 2 (10)
7-8 r: 10 sc
9 p: 3 sc, 4 prssn, 3 sc.
Leave a long end for sewing. Form a headlight by bending
yellow part of the part to white.
Big wheel (2 parts)
Center (2 parts)
(D)
1 r: 6 sc in magic ring
2p: 6 inc
3r: (1sc, inc) * 6 (18)
4 r: (2 sc, inc) * 6 (24)
5 r: (3 sc, inc) * 6 (30)
6 r: (4 sc, inc) * 6 (36)
7 r: (5 sc, inc) * 6 (42)
Cut the thread. Measure the diameter of the part. Cut from plastic canvas 2
circles of the same diameter.
wheel rim
1 p: attach the thread (C) to the front side of the center of the wheel (sl-st), (6 sc, inc) * 6 (48)
2-3 r: 48 sc per WSP
4-5 r: 48 sc
6-7 p: 48 sc for the ZSP.
Sew together the 3rd and 7th rows of the rim, forming a “lip”.
Knitting needle (2 parts)
(E)
1 p: 7 sc in magic ring
2 r: 7 sc
3 p: 7 inc (14)
4 p: sl-st, (sl-st, ch 5, sl-st in the 2nd loop from the hook, 1 sc, 2 dc, sl-st in the base
knitting needles) * 7 (7 knitting needles). Leave a long end for sewing.
Big wheel assembly
Place the plastic circle between the two central circles, fill
lightly, sew. Sew on the needles.
Small wheel (4 parts)
(D)
1 r: 6 sc in magic ring
2 r: 6 inc (12)
3 r: (1 sc, inc) * 6 (18)
4 r: (2 sc, inc) * 6 (24)
5 r: (3 sc, inc) * 6 (30).
Change to thread (C).
6-8 r: 30 sc
9 p: 30sc for ZSP. Change thread to D.
10 r: (3 sc, dec) * 6 (24)
11 r: (2 sc, dec) * 6 (18)
12 r: (1 sc, dec) * 6 (12)
Stuff the detail.
13 p: 6 dec (6).
Pull the hole. Leave a long end for sewing. Stretch
needle thread in the center from the wrong side to the front side and vice versa
several times to form a wheel.
Wheel center (E)
1 r: 6 sc in magic ring
2 r: 6 sc
3 r: (2 sc, inc) * 2 (8).
Leave a long end for sewing. Stuff the part, sew to the center
wheels.
Dust collector
Dust collector base
(D). Dial a chain of 15 ch.
1p: sc in the 2nd loop from the hook, 13 sc (14)
2 r: 1 ch, inc, 12 sc, inc (16)
3 r: 1 ch, 15 sc (16)
4 r: 1 ch, inc, 14 sc, inc (18)
5-7 r: 1 ch, 6 sc, 6 dc, 6 sb.
8 r: 1 ch, dec, 12 sc, dec (14).
Circle and cut out the same detail from the plastic canvas. Choose
wrong side and sew the canvas there.
Dust grate
(FROM). Dial 15 ch.
1 p: sl-st in the 2nd loop from the hook, (ch 8, sl-st in the 2nd loop from the hook, 6 sl-st, 2 sl-st in
main chain) * repeat until the end of the row.
Place the grate on the base of the dust collector from the front side. crochet
thread (C) with the help of ss sew on the lattice, distributing it evenly over
surface.
Assembling a locomotive
Sew the boiler to the front of the cabin.
Attach the boiler and cabin to the base of the locomotive.
Then sew on the exhaust pipe and headlight.
Attach the roof.
Sew on small wheels.
Sew on large wheels.
Sew a button on the back of the locomotive.
Decorate the cabin and roof with embroidery using stitches: “chain” and
“lazy forget-me-not”
9
Comments
Post a Comment
Please Ask Something Here.........